Industrial Printer "MP-2200"

DEFENCE & INDUSTRIAL COMPUTING SYSTEMS

Notebooks • Tablet PC • Pocket PC • Monitors • Keyboards • Printers
Portable PC • Micro PC • Pocket Data Terminal • Flash disk (SSD)

ABOUT COMPANY PRODUCTS EXHIBITIONS ON-LINE REQUEST

	Industrial Printer "MP-2200"	Industrial Printer "MP-2200" (Preliminary Specification)
		1. Product Application
		2. Technical Advantages
		3. Important Technical Features
		4. Specification
		5. Mechanical Drawing

1. Product Application

Industrial printer «MP-2200» is intended for integration in mobile computing systems and can be used in moving vehicles.

2. Technical Advantages

2.1. Thermal printers are more resistant to vibration and shock in comparison with laser, matrix and inkjet printers.

2.2. Designed in metal case it is proof against external mechanical influences.

2.3. The printer can be directly connected to DC power system with voltage from 9 to 32V or to AC power via AC/DC adapter.

2.4. The printer is equipped with highly reliable military bayonet metal connectors with a metal protective cap for DC power and interfaces (USB/LPT).

2.5. Standard configuration includes mounting kits for a work desk, wall or ceiling.

2.6. The printer can be optionally supplied with a vibration isolating platform.

2.7. The printer can be optionally equipped with heating system for cold start at low temperatures.

2.8. Thermal printer can be optionally integrated in a monoblock with a computing system unit.

2.9. The product can be optionally supplied with a mounting kit for installation in a 19" rackmount.

3. Important Technical Features

3.1. Interface – high-speed parallel ECP/EPP and/or USB.

3.2. Standard thermal paper in rolls 222 mm width is used for printing.

3.3. Recommended DC-in voltage for printer – from 12 to 32 V. Printing speed is reduced if DC-in voltage falls below 12 V. The printer cannot function if DC-in voltage falls below 9 V.

3.4. In order to print from DOS operating system the printer must be connected to LPT port.

3.5. The printer is not protected against dust and water in its standard configuration. The modification of a printer for IP54/64 protection rate against dust and water is currently under development.

4. Specification

Product type	Printer
Printing Mechanism	Thermal
Grade	Industrial / Military
Application	• Moving vehicles, factories • Army, air force, traffic police, etc. • Mobile data systems
IP Rate	IP54 (option)
Mechanical Data	• Case material: Steel • Dimensions: 343.8 x 151.2 x 160 mm • Weight: 5.3 kg - without paper roll, 5.75 kg - with paper roll Note: Case can be modified according to customer requirements
Paper Width	• Paper width 8.75 inches (222 mm) • Maximum roll diameter 2.6 inches (66 mm) • Core I.D. 0.5 inch (13 mm)
Resolution	• Vertical 203 dpi • Horizontal 203 dpi
Printing Speed	1 inch / sec, if DC-in 12 V • Printing speed can be reduced with lower voltage and lower temperature • Printing is not possible if input voltage falls below 9 V
Interface	LPT, USB • Military connectors
O/S Drivers	Windows XP / 2000, DOS • Other O/S - on request
Input Power	• DC-in from 9 to 32 V, 150 W • Military connector
Environment (operation mode)	• Operation temperature from 0°C to +50°C (32°F to 122°F) • Extended operation temperature range from -20°C to +50°C (-4°F to 122°F) (option - in project) • Altitude to 12,500 feet (3810 meters) • Sinusoidal vibration: up to 3 G, 5-500 Hz • Resistance to dust and water: IP54 (option - in project)
Environment (storage mode)	• Storage temperature from -40°C to +60°C (-40°F to 140°F)
Mounting	• Wall / Ceiling / Desk (standard) • Rack mount mounting kit (option) • Vibration isolating mounting kit (option) Note: Mounting elements can be modified according to customer requirements
AC/DC adapter (option)	• Input AC: 100 - 240 V, 50/60 Hz • Output DC: 24 V, 6.25 A • Weight: 0.9 kg • Dimensions: 165 x 80 x 45 mm • Material: plastic (metal housing is an option)

5. Mechanical Drawing

You can get full technical data sheet and mechanical drawing filling in